Control Lever En; Function Switch - Kärcher B 300 RI LPG Mode D'emploi

Have the fault rectified soon at an authorised work-
shop. There is no immediate danger to the vehicle or
the environment
Flashes quickly - major fault
Have the vehicle repaired immediately to avoid subse-
quent faults. Avoid excessive loading!
5 Warning light, yellow (CHECK)
Drive malfunction
6 Indicator lamp (L2)
7 Warning light, yellow
Fault with multiple causes: An alarm sounds
The engine control unit regulates and monitors the engine
functions.
4.3 Control lever
4.4

Function switch

10
If engine malfunctions occur during operation, the follow-
ing are displayed:
The fault code and fault description appear in the dis-
–
play
The yellow or red warning lamp lights up Engine perfor-
–
mance is reduced or engine is switched off
An alarm sounds.
–
The customer can rectify malfunctions such as high

cooling water temperature or low oil pressure by using
the appropriate measures
If the malfunctions continue, contact the authorised

KÄRCHER or KUBOTA Customer Service.
1 Brush contact pressure
2 Lever for steering wheel adjustment
3 Switching brushes on/off
4 Raising/lowering side brushes deck
5 Raising/lowering high emptying of waste container
6 Open/close flap of the waste container
1 Steering wheel
2 Multifunctional lever
for lights, indicators and horn
3 Not assigned
4 Not assigned
5 Filter cleaning for dust filter
6 Not assigned
7 Not assigned
8 Water pump switch
9 Switch for cleaning type: sweeping or scrubbing
Front position: Scrubbing cleaning type, the suction
bar lowers and the suction turbine switches on.
Rear position: Sweeping cleaning type, the sweeping
blower switches on. The suction bar remains up.
Central position: Switched off
9
-
EN