Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
3.
Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected
situations.
4. Securely hold this tool using both hands. Using a tool with
only one hand can result in loss of control.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for
a specific function. Do not modify or alter this tool or use it
for an unintended purpose.
1.1 Do not use the tool on a solid or sharp surface like
cement ground or stone. These surfaces can damage
the tamping rammer.
2.
Do not allow anyone to stand next to the tamping rammer
while it is in operation. The plate can cause a serious
crushing injury.
3.
Before operation, the operator has to be made
familiar with the necessary safety precautions and
operating techniques.
4. All users must understand the operation of all controls and
learn how to stop the engine quickly in case of emergency.
4.1 Become familiar with the machine's controls and all the
caution, warning and danger decals affixed to the
machine before attempting to start or operate.
5.
The engine and exhaust are hot during operation.
Severe thermal burns can occur on contact, especially
with the muffler.
5.1 Remove accumulated debris from the muffler and
cylinder area. Combustible debris, such as leaves,
grass, brush, etc. can catch fire if they come in contact
with a hot engine.
Visit www.princessauto.com for more information
Tamping Rammer
8619306
5
Publicité
Table des Matières
