Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate
facility.
Contact your local municipality for a list of disposal facilities
or by-laws for electronic devices, batteries, oil or other
toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing
uncontrolled discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
Problem(s)
Poor
performance
(tamping
rammer does
not reach full
speed).
Visit www.princessauto.com for more information
Tamping Rammer
Possible Cause(s)
1. The engine throttle is
not open fully.
2. The throttle lever is
not set correctly.
3. The ground is too
wet for compacting.
4. Air filter is clogged
with dust, reducing
engine performance.
5. The engine speed is
too low.
6. The spark plug is
fouled.
7. The air filters are
dirty.
8. Carburetor cannot
supply oil freely.
Suggested Solution(s)
1. Open the engine
throttle completely.
2. Set the throttle lever.
3. Dry the soil before
compacting.
4. Clean or replace the air
filter cartridge.
5. Check the engine
speed. Refer to the
engine instruction
manual.
6. Clean spark plug.
7. Replace/clean air filter.
8. Clean and repair
carburetor.
8619306
17
Publicité
Table des Matières
