Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8619306
TRANSPORTATION
WARNING! Transport the tamping rammer with an empty
fuel tank or with the fuel shut-off valve secured in the
OFF position to avoid a hazardous fuel or oil spill.
1.
Allow the engine to cool before transporting to prevent
burn injuries or a fire hazard.
2.
Do not attempt to load the tamping rammer onto a
vehicle by yourself. Use a crane or additional people to
assist in loading/unloading. The tool is heavy and may
cause a back injury.
3.
Do not hold the tamping rammer by the handle while
loading as it may swing open and cause an impact injury.
Attach a crane hook to the frame's top rail and only lift as
far as necessary to move the tool.
4. Secure the tool upright to prevent it from moving or
toppling over during transportation. The tool is heavy
and can cause a crushing injury if it falls over onto a user or
a bystander.
5.
Transport the tool in the upright position. Do not transport
the tool at an angle greater than 30°. Turn all valves to the
OFF position. Ensure all caps are in place and sealed tight
to prevent spills if it should fall over during transportation.
5.1 Remove fuel from the engine's fuel tank when possible
before transportation.
6.
Do not transport with the engine's spark plug facing down.
Transporting with the spark plug down will result in hard
starting and/or engine smoking.
16
Tamping Rammer
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
