Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8619306
4. Do not install or use in the presence of flammable gases,
dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by
the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and
side protection for the eyes. Eye protection equipment
should comply with CSA Z94.3-07 or ANSI Z87.1 standards
based on the type of work performed.
2.
Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.
Non-skid footwear is recommended to maintain footing
and balance in the work environment.
4. Wear protective clothing designed for the work
environment and tool.
5.
Wear steel toe footwear or steel toe caps to prevent a
foot injury.
6.
Wear a NIOSH approved respirator when working on
materials that produce hazardous fumes, dust or
particulate matter.
7.
This tool can cause hearing damage. Wear hearing
protection gear with an appropriate Noise Reduction
Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become
entangled with the moving parts of a tool. Keep long hair
covered or bound.
4
Tamping Rammer
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
