Product Description; Permitted Uses And Applications; Technical Data - Aprimatic RSK24 SMT Notice D'installation

Masquer les pouces Voir aussi pour RSK24 SMT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SAFETY PRECAUTIONS
• Follow the manufacturer's instructions.
• The installation team must check the correct installation and functioning of the equipment.
• Only use the product for the permitted uses specifi ed. Do not use the product for purposes other than those specifi ed.
• Do not tamper with or modify the product.
• Only use original spare parts.
• Cordon off the working area to prevent the access of unauthorised persons.
• Ensure that the working area is clear of obstacles and the fl oor is not slippery.
• All equipment used must be in good working condition.
• Ensure that the work area is well lit. Ensure that the work area is free from obstructions and health and safety hazards.
• Do not allow unauthorised persons into the work area.
• Ensure that someone is present in the work area at all times. Do not leave the area and equipment unattended.
1.1

PRODUCT DESCRIPTION

RSK24 SMT - microprocessor unit for driving one or two motors with total maximum power rating of 250 Watt.
It can be supplied with a radio receiver already plugged into the board.
Operator functions can be set to match user needs. This is done by modifying the operating parameters as described in
section 4.1 "Advanced Programming".
1.2

PERMITTED USES AND APPLICATIONS

The RSK24 SMT electronic unit has been designed for the
automatic control of Aprimatic RAIDER ONE SMART operators
for single- and double-wing gates.
You should note the operating restrictions specifi ed in the
installation manual supplied with your operator.
Information
Only use the product for the permitted uses
specifi ed. Do not use the product for purposes other
than those specifi ed.
Do not tamper with or modify the product.
The product must only be installed using APRIMATIC
material.
Aprimatic S.p.A. declines all liability for damages caused
by failure to follow these instructions
1.3
TECHNICAL DATA (Tab. 1)
Technical specifi cations
Power supply voltage for accessories
Frequency
Power consumption (no load)
Power consumption (Max.)
Operating temperature
Storage temperature
Relative humidity
Protection class
F1 - primary transformer protection fuse
F2 - external accessories protection fuse (24 V DC)
F3- electronic circuit protection fuse
Safety precautions/
RSK24 SMT unit
DL1
J4
F2
F3
F1
M1
-
+
24 V AC
L
N
BATT
RAIDER ONE SMT
230 V AC (+6 % ; -10 %)
50/60 Hz
3 W
250 W
(with 2 motors and accessories connected up and operating)
-20°C +55°C
-20°C +85°C
<90% non condensing
IP44 (only with IP44 housing)
3.15 A fast blow
1 A delayed blow
8 A fast blow
- 15 -
Product description
JP1
DS1
S2
S3
J2
J3
J1
1
2
3
4
5
6
7
8
9
10 11 12
M1
M2
Fig. 1
CN1
S1
CN2
13
Tab. 1

Publicité

Table des Matières
loading

Table des Matières