Disposal & Environmental Protection - mspa Alpine B-091 Manuel De L'utilisateur

Spa Tub and Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
1. Clean and dry the area to be repaired thoroughly
2. Apply the glue to the PVC patch and quickly attach it onto the damaged surface. (Glue is not included)
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE: Glue is not included
1
Storage and Prepare for the Next Time Use
1. Drain and clean the spa following the "Drainage" and "Spa Cleaning" sections
2. Reserve the set up instructions to deflate and disassemble the spa tub, spa control
unit and air bladder
3. Make sure all the spa components and accessories are thoroughly clean and dry
before storage. Air-dry the spa tub in the mild sun for an hour before folding
4. Fold the spa tub loosely and avoid any sharp corners to prevent damage or leakage
to the spa liner
5. Prepare new additional cartridge for next time use
6. Store the spa and accessories in a dry, temperature controlled, between 32°-104°F (0°- 40°C) storage location
7. Original packaging is recommended to be used for storage
DISPOSAL & ENVIRONMENTAL PROTECTION
This marketing indicates this product should not be disposed with other household wastes. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. You can obtain information on disposal from your local authorities.
To return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling.
2
pin hole
19
3
SUN
TM