Disposal And Environmental Protection - mspa Alpine Manuel Du Propriétaire

NOTE: Glue is not included.
1
Storage and Prepare for the Next Time Use
1. Drain and clean the spa by following the
"Drainage" and "Spa Cleaning" sections
2. Reserve the set up instructions to deflate and
disassemble the spa tub, spa control unit and
air bladder (*optional)
3. Make sure all the spa components and
accessories are thoroughly clean and dry before
storage. Air-dry the spa tub in the mild sun for
an hour before folding
4. Fold the spa tub loosely and avoid any sharp
corners to prevent damage or leakage to the
spa liner
5. Prepare new additional cartridge for next time use
6. Store the spa and accessories in a dry, temperature
controlled, between 0°C - 40°C (32°F - 104°F) storage location
7. Original packaging is recommended to be used for storage

DISPOSAL AND ENVIRONMENTAL PROTECTION

2
pin hole pin hole
This marking indicates this product should not be disposed with other household wastes.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
You can obtain information on disposal from your local authorities.
To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental
safe recycling.
SUN
20
3
®