Disassembly And Repairs - Festo DFME-Las Série Notice D'utilisation

DFME−...−LAS
9

Disassembly and repairs

Warning
Hot surface temperatures (up to 70 °C in normal operation, over 100 °C when
there is a fault) can cause burns.
· Make sure that hot surfaces on the guided drive can only be touched if
the user is sufficiently protected against burning (e.g. by wearing protective
gloves).
Warning
Strong magnetic fields impair the functioning of electronic devices
(e.g. heart pacemakers).
· Always leave the linear motor fitted inside the DFME−LAS.
Otherwise strong magnetic fields may occur.
· Always leave the housing of the linear motor mounted.
The screws in the housing must not be loosened.
· Switch off the power supplies.
· Recommendation: Return the product to our repair service for overhaul. This
ensures that the necessary fine adjustments and checks will be considered.
· Information on spare parts and aids can be found under:
www.festo.com/spareparts
40
Festo DFME−...−LAS 0904NH English