Festo DFME-Las Série Notice D'utilisation page 29

DFME−...−LAS
Note
Particles (e.g. dust, liquids, ...) which penetrate into the mechanics of the
guided drive can cause damage or lead to reduced performance.
· Make sure that the dust burden does not exceed the permitted IP protection
class (è chapter 12 Technical Data").
Note
Improper handling can result in malfunctions.
· Make sure that the specifications in this chapter are always observed.
Only in this way will the product function correctly and safely.
· Compare the maximum values specified in these operating instructions with
those of your actual application (e.g. forces, torques, temperatures, masses,
speeds).
Operation of the product in compliance with the relevant safety regulations is
contingent on adherence to the load limits.
· Take into consideration the ambient conditions at the location of use.
Corrosive elements in the environment (e.g. ozone) will reduce the service life
of the product.
· Please comply with national and local safety laws and regulations.
· Remove transport packaging such as foils and cardboard.
The packing is intended for recycling (except for: oiled paper = other waste).
· Unauthorised product modification is not permitted.
· Note the warnings and instructions on the product and in the relevant
operating instructions.
· Take the tolerance of the tightening torques into account. Unless specified
otherwise, the tolerance is ±20 %.
Fitting in a vertical or sloping position:
· Make sure that the piston rod has reached a stable position when the
operating voltage is switched off or if there is a power failure (e.g. the lowest
point or secure it with moveable bolts, e.g. cylinder).
Festo DFME−...−LAS 0904NH English
29