Operation; Service And Maintenance - Festo DFME-Las Série Notice D'utilisation

DFME−...−LAS
7

Operation

Warning
· Ensure the following in the movement area around the DFME−LAS
nobody can place his/her hand in the path of the moving parts
(e.g. using a protective screen)
there are no objects in the positioning range.
It must not be possible to touch the DFME−LAS until the mass has come to a
complete standstill.
8

Service and maintenance

Warning
Hot surface temperatures (up to 70 °C in normal operation, over 100 °C when
there is a fault) can cause burns.
· Touch the hot guided drive only if there is sufficient protection against burn
ing (e.g. use protective gloves).
Note
Modules may be damaged if they are not handled correctly.
· Observe the handling specifications for electrostatically sensitive
components.
Note
Liquid cleaning agents such as soap suds can damage the guided drive.
· When necessary, clean the DFME−LAS only with a soft dry cloth.
Liquids must not penetrate into the interior of the DFME−LAS.
· If necessary, remove ferromagnetic deposits (e.g. metal filings) from the
magnetically coded measuring tape 8. Even the low magnetic attraction force
of the measuring tape can cause metal dust to accumulate.
Festo DFME−...−LAS 0904NH English
39