Procedure For Tilting Down - Yamaha F175 Manuel De L'utilisateur

Operation
1
1. Tilt support lever
4. Once the outboard motor is supported
with the tilt support lever, press the pow-
er trim and tilt switch "
tract the trim rods. NOTICE: Make sure
that the trim rods retracts completely
during mooring. This protects the rods
from marine growth and corrosion,
which could damage the power trim
and tilt mechanism.
1
1. Trim rod
72
ZMU07744
" (down) to re-
[ECM00253]
ZMU07764
EMU42702

Procedure for tilting down

1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
1
1. Tilt support lever
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
1
1. Power trim and tilt switch
"
ZMU07770
"
ZMU07851