Checking Power Trim And Tilt System - Yamaha F175 Manuel De L'utilisateur

Operation
1
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
1
2
3
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
5. Push the cowling lock levers inward to
secure the top cowling.
1
1. Cowling lock lever
60
2
3
ZMU07756
2
3
ZMU07757
ZMU07758
1
1. Cowling lock lever
6. Check the fitting of the top cowling by
pushing it with both hands. NOTICE: If
the top cowling is not installed cor-
rectly, water can enter the top cowling
and damage the engine, or the top
cowling can blow off at high speeds.
[ECM02371]
EMU2915A

Checking power trim and tilt system

EWM01931
WARNING
 Never get under the lower unit while it is
tilted, even when the tilt support lever is
locked. Severe injury could occur if the
outboard motor accidentally falls.
 Body parts can be crushed between the
motor and the clamp bracket when the
motor is trimmed or tilted.
 Be sure no one is near the outboard mo-
tor before performing this check.
1
ZMU07759
ZMU07760