Step 6: Mounting the Handle
1. Mount the handle (5) using the short screw (16) and the matching washer (17) to the
height-adjustable inclined tube (6).
Use
CAUTION!
❐ Check whether the device has been assembled correctly each time you use it. Check
whether the jumping mat has been attached correctly, all screws have been tightened
and whether the support bar and the handle have been correctly mounted.
❐ Always check the device for wear before each use. Look out in particular for signs of
wear on the jumping mat.
❐ Start the exercises slowly and only increase the intensity gradually. Improper use of
the device and excessive training can be detrimental to your health.
❐ Stop training immediately if you suddenly feel weak or dizzy. If you feel sick, have
pain in your chest or arms, an irregular heartbeat, shortness of breath or other unu-
sual symptoms, seek medical attention immediately.
❐ Make sure you take enough breaks between training sessions.
08114_de-gb-fr-nl_V2.indb 36
08114_de-gb-fr-nl_V2.indb 36
36
17.11.2014 08:37:19
17.11.2014 08:37:19