Step 3: Attaching The Jumping Mat Cover - Power Maxx SP14111 Mode D'emploi

Step 3: Attaching the Jumping Mat Cover

08114_de-gb-fr-nl_V2.indb 33 08114_de-gb-fr-nl_V2.indb 33
11. Continue tensioning the loops in de-
scribed way until the jumping mat
has been completely tensioned.
Make sure that you have positioned
all loops evenly on the six parts of
the frame.
1. The jumping mat cover is placed
over the rope loops from above.
2. For each leg, there is a tab on the
bottom of the cover which you pull
over the legs of the trampoline.
3. Then pull the cover on tight with the
tugs at the side and knot the tugs
onto a leg.
33
17.11.2014 08:37:19 17.11.2014 08:37:19