Step 2: Attaching The Jumping Mat - Power Maxx SP14111 Mode D'emploi

Step 2: Attaching the Jumping Mat

CAUTION!
❐ Before you fi t the jumping mat, satisfy yourself that the screws have been securely
tightened. Properly tighten them again if necessary!
Before attaching the jumping mat, please read the instructions in
this section carefully through! Make yourself familiar with the ten-
sioning tool and its use. This makes it easier for you to attach the
jumping mat!
A A
08114_de-gb-fr-nl_V2.indb 30 08114_de-gb-fr-nl_V2.indb 30
1. First of all, the 3 rope loops with the
A
pink spheres are attached to the
frame (A).
2. To do this, pull the rope loops over
the frame and hook the pink spheres
into the loop.
3. The fi rst two loops can be pulled
over the sphere by hand, but for the
third and all other loops we recom-
mend that you use the tensioning
tool, as described in the following
A
steps. Note: the third rope loop with
a pink sphere is under heavy tension
but the more rope loops you attach,
the easier it
30
gets.
17.11.2014 08:37:17 17.11.2014 08:37:17