Power Maxx SP14111 Mode D'emploi page 32

B
A
B
08114_de-gb-fr-nl_V2.indb 32 08114_de-gb-fr-nl_V2.indb 32
8. Now pull the sphere through the tab
by pressing the tensioning tool down
away from you (see the arrow in the
picture). The sphere will slip into the
tab below the frame on its own.
NOTE: The sphere can only slip into
the tab, when the hook of the ten-
sioning tool is positioned in between
the loop (see picture).
9. Remove the tool from the sphere.
The sphere is now fi tted in the cor-
rect position.
10. .After tensioning the loops with the
pink spheres (A), start tensioning the
A
loops with the blue spheres (B) as
illustrated in the picture.
B
A
32
DANGER OF CRUSHING!
Never try to pull the sphere
by hand through the loop!
17.11.2014 08:37:18 17.11.2014 08:37:18