Power Maxx SP14111 Mode D'emploi page 31

08114_de-gb-fr-nl_V2.indb 31 08114_de-gb-fr-nl_V2.indb 31
4. First guide the tensioning tool
through the loop from above and
then hook the end over the edge of
the frame.
5. Turn the tensioning tool over. Make
sure that you keep the loop ten-
sioned as you do so.
6. Reach for the appropriate sphere
with the hook. When you do this,
make sure that the sphere is com-
pletely enclosed by the tool. Make
sure that there is no other rub-
ber loop between the tool and the
sphere.
7. Grab the sphere using the hook.
31
17.11.2014 08:37:17 17.11.2014 08:37:17