Two Open-Closed Groups With Temperature Sensors; Two Mixing Groups; Central Heating Pump Group And Calorifier Group - REMEHA c-Mix Notice D'installation Et D'entretien

OT
c-Mix
T
DHW
T
OT
c-Mix
T
T
OT
c-Mix
T
RTC
1
RTC
2
T003250-A
T
outside
RTC/OTC
1
OTC
2
T002645-B
T
outside
RTC/OTC
1
T
DHW
storage
T002648-C
Remeha
4.3.3 Two open/closed groups with temperature
sensors
The groups can be controlled independently of
each other.
4.3.4

Two mixing groups

The groups can be controlled independently of
each other.
4.3.5 Central heating pump group and calorifier
group
The calorifier group must always be configured as
group 2. Set priority switch Q (see Chapter 4.7)
to setting 2 so that the calorifier always has
priority for the DHW demand. Set the pump
post-circulation time on the c-Mix for group 2 to 0
minutes. In this situation, no valve is used.
32
c-Mix