Remeha
4.4
Required parts for each type of control
The tables below provide a general idea of the
parts you will need depending on the type system
you want to install. Contact your Remeha dealer
for precise ordering information or visit nl.remeha.
com.
Required in the installation Required parts
2 weather-compensated
control groups
2 room control groups
1 weather-compensated
control group, 1 room control
group
4.5
Type of group
Required in the installation Required parts
Open/closed group
Mixing group
Pump group
Calorifier group
4.6
Type of boiler
Required in the installation Required parts
For mixing group, pump group or calorifier group:
Combi boiler with pump
Solo boiler with pump
Boiler without pump
For open/closed group::
Boiler with pump
Boiler without pump
36
c-Mix
•
1 outside sensor
•
2 OpenTherm
controllers (with
weathercompensated
control) or 1 Remeha
iSense controller
•
2 OpenTherm
controllers or 2
Remeha iSense
controllers
•
1 outside sensor
•
2 OpenTherm
controllers (with
weathercompensated
control) or 1 Remeha
iSense controller
•
1 open/closed valve
•
Preferably: 1 contact
sensor
•
1 contact sensor
•
1 mixing valve
•
1 pump
•
1 non-return valve
•
1 pump
•
1 storage tank sensor
•
1 non-return valve
•
1 pump
•
Low loss header
•
Pump pipe connector
•
No extra requirements
•
If the boiler requires
that: Spring-loaded/
adjustable pressure
difference controller
•
Pump
•
If the boiler requires
that: Spring-loaded/
adjustable pressure
difference controller