Service Connection Recom; User Level - REMEHA c-Mix Notice D'installation Et D'entretien

7

SeRVICe CoNNeCTIoN ReCoM

# brief description
Valve choice
1
group 1
Valve choice
2
group 2
long description Choices
Close manually
Open manually
Thermal 2-contacts 3-way
Thermal 2-contacts 2-way
2-contacts 2-way (0-30s)
2-contacts 2-way (30-120s)
1: Valve choice 2-contacts 2-way (120-240s)
group 1. 2-contacts 3-way (0-30s)
Can also be set 2-contacts 3-way (30-120s)
using rotary switch 2-contacts 3-way (120-240s)
2-contacts 3-way (0-30s)
3-contacts 3-way (30-60s)
3-contacts 3-way (60-120s)
3-contacts 3-way (120-240s)
No function
Hot water eco
Close manually
Open manually
Thermal 2-contacts 3-way
Thermal 2-contacts 2-way
2-contacts 2-way (0-30s)
2-contacts 2-way (30-120s)
2: Valve choice 2-contacts 2-way (120-240s)
group 2. 2-contacts 3-way (0-30s)
Can also be set 2-contacts 3-way (30-120s)
using rotary switch 2-contacts 3-way (120-240s)
2-contacts 3-way (0-30s)
3-contacts 3-way (30-60s)
3-contacts 3-way (60-120s)
3-contacts 3-way (120-240s)
No function
Hot water group
45
The service connection can be used with the aid
of Recom. An interface is available separately for
this. Recom can be used to track temperatures,
valve and pump control etc. on the PC. It is also
possible to change a number of parameters. This
can be done at user level and service level. The
user level corresponds to what you can configure
on the c-Mix using the rotary switches. The Recom
can be used to read the position of the switch. The
user settings can be changed via Recom. Note:
the c-Mix will start flashing with code 4: "The posi-
tion of the switch does not match the configuration
saved in the c-Mix." The message will disappear
when the rotary switches are set to the correct
position. Below is a list of available parameters
with a brief description, the choice of options and
the standard value.
7.1

user level

Standard value
Close manually
Close manually