The Set-Up Menu: Level 2; General Remarks; Changing The Parameter; Exit The Set-Up Menu - GT Trans Pocket 4000 CEL Mode D'emploi

The Set-up Menu: Level 2

General remarks

The functions Eln (electrode-line selection), r (welding circuit resistance), L (indication of
welding circuit inductivity) and ASt (anti-stick) are located in a second menu level.
Changing to the second menu level (2nd)
-
-
-
-
The power source is now in the second menu level (2nd) of the setup-menu. The func-
tion "Eln" (electrode-line selection) is now displayed.
Changing the -
parameter -
Exit the set-up
menu
Fig.32 Level 2 of the Set-up Menu (2nd)
Choose the parameter "2nd", as described in the section headed "The Set-up menu:
Level 1"
Press and hold the Setup / Store button (7)
Press process button (3)
Release the Setup / Store button (7)
Use the Process button (3) to select the desired parameter
Use the adjusting dial (1) to alter the value of the parameter
1. Press the Setup / Store button (7)
NOTE! Any alterations you have
made will be stored in the memo-
ry when you exit the Level 2 of
the Set-up Menu (2nd).
NOTE! The complete list of
parameters for Level 2 of the Set-
up Menu (2nd) is explained in the
section headed "Parameters
2nd".
27