Pump Pressure Checks - L.B. White Foreman CI500 Manuel Du Propriétaire

22
Foreman Ductable Oil Indirect-Fired Heater

Pump Pressure Checks

ATTENTION:
Consult the data plate on the heater or page 4 in this
manual for specific pressures to be used.
1. Connect pressure gauge to either gauge port.
2. Start heater
3. Allow motor to reach full speed.
4. Adjust pressure (using flat blade screwdriver).
5. Turn relief valve clockwise to increase pressure.
6. Turn relief valve counter clockwise to decrease
pressure.
7. Set pump pressure to correct pressure as indicated
on heater nameplate.
8. Stop heater.
9. Remove pressure gauge and plug fuel pump port.
Gauge Port
Owner's Manual • Foreman
Pressure
adjustment
screw
Pump
bleed valve