Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Spray Technique (fig. 2)
The spray movement should come from the arm, not just from the wrist.
This ensures that a uniform distance is maintained between the spray gun
and the spray surface during the spray operation. Select a distance of 20-30
cm (gun length is approx. 25 cm), depending on the desired spray jet width.
Important: Start at the edge of the area to be sprayed. Start the spray movement first
of all, and then press the trigger. Avoid interruptions within the area to be
sprayed.
i
"Cross spray" when using paint with a poor covering capacity or if the
surface is highly absorbent (Fig. 3).
For further information on setting the spray pattern and the correct spraying
technique refer to the instructions of the basic device.
Interruption of Work
•
Turn the machine off.
•
During longer breaks, vent the container by briefly opening and then closing it again.
•
Clean nozzle openings after an interruption in operation.
i
Make sure that the container is secure when setting down the WallPerfect
spray attachment.
Shutting down and cleaning
Please also refer to the instructions of the basic device.
1)
Switch the unit off.
2)
Screw of the container and empty it. Pull out the suction tube with container seal.
3)
Preclean the container and feed tube with a brush. Clean the ventilating bore
(Fig. a, C).
i
We recommend the use of a common household washing-up brush to clean
the container.
CAUTION! Never clean seals, diaphragm and nozzle or air holes of the spray gun with
metal objects.
The ventilation hose and diaphragm are only solvent-resistant to a limited
extent. Do not immerse in solvent, only wipe.
4)
Pull the ventilating hose (Fig. 1 A, 12) at the top from the gun body. Screw off the valve
cover (13). Remove the diaphragm (14). Clean all the parts carefully.
5)
Unscrew the union nut and remove the air cap and nozzle. Clean the air cap, nozzle
seal and nozzle with a brush and solvent or water.
CAUTION!
Never clean seals, diaphragm and nozzle or air holes of the
spray gun with metal objects.
8
WallPerfect spray attachment
Publicité
Table des Matières
