Viscosity Table; Spraying Technique; Interruption Of Work - WAGNER WOOD&METAL EXTRA DETAIL Mode D'emploi

Detail spray attachment
Sprayed material
Thinner-soluble primers
Thinner-soluble varnishes
Water-soluble primers
Water-soluble varnishes
Wood preservatives, strippers, oils
Disinfectants, plant protectants
Automobile spray paint
Adjusting the material quantity
Very small quantities can be processed with this attachment. To prevent
paint runs on the object, first adjust the paint quantity by spraying
onto a piece of card or paper from the same spraying distance.
First turn the adjustment knob (Fig. 1, Item 7) fully to the left (-) and then slowly increase
the material quantity to the desired amount by turning it to the right (+).
For further information on setting the spray pattern and the correct spraying technique
refer to the instructions of the basic device.

Spraying technique

With the Detail spray attachment extremely fine free hand lines can be sprayed for
creative at small distances and using small amounts of material. If you stick a self-made
template to the object, sharp edges result and you can spray the paint
directly on without great losses. In order no to blow away small objects
during the coating process, we recommend fastening the object with a
clip or double-sided adhesive tape (not included in the scope of delivery).
Further information on the spraying technique can be found in the instructions for the
basic device.

Interruption of Work

When processing 2-component varnishes, clean the device immediately.
i

Viscosity Table

Wood&Metal, Wall
280 W
max.30
max.30
max.30
max.25
max.25
Runout Time in Seconds
300 W 350 W
max.30 max.30
max.30 max.30
max.30 max.30
max.30 max.30
undiluted
undiluted
max.30 max.30
GB
Universal
630 W
max.30
max.30
max.30
max.30
max.30
7