Descaling; Cleaning The Interior Parts; Changing The Descaling Time - Boneco H680 Mode D'emploi

DESCALING (CONTINUED)

DESCALING

1. Fill the tank halfway with hot tap water and add two
packets of CalcOff.
2. Start descaling mode by pressing the
the BONECO H680 keypad for 5 seconds. Change the
duration of descaling as needed using the
buttons.
The appliance then descales itself automatically.
After descaling has finished, the cleaning symbol on the
display goes away automatically.
Then a flashing symbol indicates that the water in the
appliance has to be replaced:

CLEANING THE INTERIOR PARTS

After each descaling, it is absolutely necessary to clean
the interior parts (see the next page).
button on
and

CHANGING THE DESCALING TIME

The default setting for the descaling time is 4 hours. To
intensify or shorten the descaling, adjust the duration of
descaling using the and buttons.
• Shorten the duration of descaling if the BONECO H680
is only slightly dirty.
• Lengthen the duration of descaling if the BONECO
H680 is very dirty. The maximum duration of descaling
is 12 hours.
57
en