Error Codes; Loudspeaker Connection; Direct Outputs; 70 / 100 V Constant Voltage Outputs - RCF Invision 354MP Manuel De L'utilisateur

ERROR CODES

ERR-1 and ERR-2
Push and hold (at least 2 seconds) the
disc. If the CD is not ejected, push the
y
EJECT (2 seconds) again.
Should not be possible to eject the CD, please consult your dealer (or an
authorized service centre).
ERR-3
The compact-disc has been wrongly inserted upside down.
ERR-4
The compact disc format is not supported (or data / files are not correct).

LOUDSPEAKER CONNECTION

:

DIRECT OUTPUTS

Use 1 output only - DO NOT MIX 100 / 70 V CONNECTIONS

70 / 100 V CONSTANT VOLTAGE OUTPUTS

•
Each loudspeaker shall have a line transformer with the input voltage equal to the line voltage
(70 / 100 V).
•
The loudspeaker total power (considering both direct and zone outputs) shall not be higher
than the amplifier maximum power (320 W).
POWER OUTPUT
COM 70V 100V
0 100V 0 100V
POWER OUTPUT
2 W
COM 70V 100V
62
y
t
100 V POWER OUTPUT
COM 70V
0
0 100V
2 W MONITOR OUTPUT FOR A LOW IMPEDANCE
LOUDSPEAKER (4 Ω)
The loudspeaker impedance shall not be lower than 4 Ω.
Note: an impedance equal to 4 Ω allows to get the max.
power (2 W). A higher impedance leads to a reduction of
the delivered power (e.g. 8 Ω: ca. 1 W; 16 Ω: ca. 0.5 W).
An impedance lower than 4 Ω overloads the output.
EJECT button to eject the compact
RESET button by using a pin and then
100V
70V 0 70V 0
70 V
70V