Further Information - RCF Invision 354MP Manuel De L'utilisateur

EXAMPLE OF CONNECTION TO AN RCF UP 2321:
•
A
Connect MUSIC OUT
•
Connect the UP 2321 (100 V / 70 V) constant voltage output to EXT AMP INPUT

FURTHER INFORMATION

SEQUENTIAL COMMAND
The SEQUENTIAL COMMAND
zones either the chime (short or long, set through the dip-switch 7 of the PRESET group
alarm tone (set through the dip-switch 8 of the PRESET group
CHANNEL 2 - 3 'PUSH' / 'TOGGLE' ('SMART') PRIORITY MODE
The dip-switches 5 and 6 of the PRESET group
3 respectively between 'push' (the priority is held only if the command is still present) and 'toggle'
(the priority is switched on / off by every impulse of the command).
Note:
the chosen priority mode is applied to both BM 3001 paging microphones (if present) and
priority commands (of removable connectors), but never to BM 3003 paging microphones.
i
Set the dip-switch 5 (for the input 2) and/or the dip-switch 6 (for the input 3) of the PRESET
group to OFF if BM 3003 paging microphones are connected.
52
to UP 2321 AUX INPUT
G
has the highest priority and starts (and keeps) playing to all
D
, allow choice of priority mode for channels 2 and
K
.
D
D
) in the OVERRIDE mode.
) or the