Rear Panel - RCF Invision 354MP Manuel De L'utilisateur

REAR PANEL

a :
q
2 RJ 45 sockets (channels 2 and 3) to connect either:
•
A single BM 3001 paging microphone only
•
Or a single BM 3003 (3-zone) paging microphone
•
Or a daisy-chain made of max. 12 BM 3003, by using an additional power supply unit.
i
Note about the setting of the dip-switches 3 and 4 (see
the 'LINE with PHANTOM' mode (both dip 3 and 4 ON); when connecting 1 or more BM 3003,
set the 'LINE' mode (both dip 3 and 4 OFF).
w
Antenna input (the antenna is necessary when using the tuner).
e
4 balanced audio inputs (channels 1, 2, 3, 4) with sockets for removable connectors.
+ Hot audio input
– Cold audio input
GND ground
CMD command – priority access when connected to ground
r
Each channel has 4 dip-switches:
1
OFF – CHIME OFF: the chime is disabled.
OFF: the audio hi-pass filter is not inserted
2
OFF – HI PASS
(flat frequency response).
3
OFF – DIP 3 OFF: see the next table.
4
OFF – DIP 4 OFF: see the next table.
L
G
r
D H J
F S A ] [ p o
): when connecting a BM 3001, set
CHIME: (ON) the chime will be played as
soon as a priority command is activated.
HI PASS: (ON) the audio hi-pass filter is
inserted.
DIP 3: (ON) see the next table.
DIP 4: (ON) see the next table.
e w
i u y t
41