Temperature And Frost Alarm; Activating / Deactivating The The Temperature And Frost Alarm - Auriol Z31915 Instructions D'utilisation Et Consignes De Sécurité

Temperature and frost alarm

The temperature alarm is a short beep, which sounds as soon as the outdoor
temperature exceeds or falls below the preset temperature range. Follow the below
procedures to set the desired temperature range.
Press the – button
Hold the – button down for 3 seconds. The maximum temperature display
blinks. Press the + or – button to set the values.
Press the MODE button
display blinks. Press the + or – button to set the values.
Press the MODE button to confirm your setting.
Activating / deactivating the the temperature
and frost alarm
If more than one outdoor sensor is activated, press the channel button
select one.
Press the – button
If the frost alarm alarm is activated, the corresponding symbol
the outdoor temperature. The alarm signal sounds at –1 °C to + 3 °C.
to get top the temperature alarm mode.
36
to confirm your setting. The minimum temperature
34
repeatedly to activate the temperature and frost alarms.
36
to
37
appears next to
23
GB/IE 35