Setting The 12 / 24 Hour Mode / °C / °F / Hpa / Inhg / Time Zone / Time / Date / Language Manually - Auriol Z31915 Instructions D'utilisation Et Consignes De Sécurité

Setting the 12 / 24 hour mode / °C / °F / hPa / inHg /
time zone / time / date / language manually
The reception of DCF radio signal where the weather station has been positioned may
become degraded or interrupted. If this happens you can set the device manually.
Follow these steps:
1. Press and hold down the MODE button
blinks in the display. Press the + or – button
format.
Note: The AM symbol in the time display
12 hour mode. The PM symbol in the time display stands for after noon in
12 hour mode.
2. Confirm your setting by pressing the MODE button. The temperature unit "°C "
or "°F" flashes in the display. Press the + or – button to choose the desired
temperature unit.
3. Confirm your setting by pressing the MODE button. The barometric pressure's
unit flashes in the display. Press the + or – button to set the desired unit (hPa /
inHg).
4. Confirm your setting by pressing the MODE button. The time zone indicator
flashes in the display. Press the + or – button to set the desired value (-2 to +2).
Note: The standard setting for the time zone is GMT+1. Set the weather station
to correspond to your time zone.
20 GB/IE
for about 3 seconds. "12 Hr" or "24 Hr"
34
, to choose the desired hour
35 36
stands for before noon in the
7