Waste Disposal And Environmental Protection; Technical Specifications - Grizzly ERM 1844 G Traduction De La Notice D'utilisation Originale

• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
• Defective units returned to us will be
disposed of for free.

Technical Specifications

Electric Lawnmower
Motor input power
Mains voltage .....................230 V~, 50 Hz
Protection class ..................................II
Protection type................................... IP24
Idling speed ..............................3250 min
Cutting circle ....................................44 cm
Cut height ................................. 20-70 mm
Weight ...........................................16.2 kg
Lawn bag volume
Sound pressure specification
(L ) ................86.9 dB(A), K
pA
Noise level specification
guaranteed .............................. 96 dB(A)
measured ...93.9 dB(A), K
Vibration (a ) ............. 2.1 m/s
h
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
(domestic connection) of a maximum of
0.277 Ohms. The user must ensure that
the device is operated only on a power
supply network that fulfils this require-
ment. If necessary, the local power supply
company can be asked for the system
impedance.
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specified in the decla-
ration of conformity.
Technical and visual modifications may be
made without notice in the course of further
development. All dimensions, informa-
tion and specifications in these operating
instructions are therefore not guaranteed.
As such, no assertion of legal claims can
be enforced on the basis of the operating
instructions.
...........ERM 1844 G
......................... 1800 W
................................52 l
=2.26 dB(A)
pA
(L )
WA
=2.26 dB(A)
WA
, K=1.5 m/s
2
GB
-1
2
29