SUHNER LWC 17-45 DH Instructions D'utilisation page 5

For additional safety instructions
refer to enclosed brochure DL 39 220 01
Operation conditions and instructions
The machine can be turned on and off by
turning the lever. 1. Turn locking lever in
direction indicated by arrow , and 2. Depress
valve lever 2.
Grinding/Deburring/Cleaning
• Observe even material removal, avoid
chattering.
• Do not treat any material containing asbes-
tos.
Change of tools/abrasives
• Disconnect air supply before changing tools/
abrasives
• Hold Spindle 4 with wrench 5, mount or
dismount collet 6 using wrench 7.
• Check concentricity, use only vibration free
tools and always observe M.OS. (Max.
operating speed). Observe mounting
instructions for Mounted Stones!
Maintenance
• Store tool in a clean, dry place.
Check the idling speed from time to time.
• Even if the tool still gives satisfactory service,
have it checked by a trained mechanic after
300 to 400 operation hours, or at least once a
year. Disassembly motor, clean and replace if
necessary the four vanes.
Also check/replace grease -Isoflex NBU 15- in
the gear head 1.
• Warranty claims can only be considered, if
tool is returned complete.
Accessories:
All accessories can be found in theSUHNER®
Abrasive Power Tool catalog.
Subject to change.