Technical Data - Beninca VN.S Série Mode D'emploi

1) DESCRIPTION
Automation system for balanced sectional doors (1/20 limit switch ratio) and rolling doors (1/40 limit switch ratio) available in various
versions:
- with manual release (S versions) or manual chain operation (M versions).
- with single-phase or three-phase power supply (T series)
- with adjustable cam-activated limit switch with standard wiring or absolute Encoder (ESW versions) for quick connection to the THINKY
central control unit, using wiring available in different lengths.
- manned control (UP versions).
The following table shows the various models* and their main features:
LS
Model
ratio
VN.S20 1/20
VN.S40 1/40
VN.ST20 1/20
VN.S20UP 1/20
VN.S40UP 1/40
VN.S20ESW 1/20
VN.ST20ESW 1/20
VN.M20 1/20
VN.M40 1/40
VN.MT20 1/20
VN.MT40 1/40
VN.M20UP 1/20
VN.M40UP 1/40
VN.M20ESW 1/20
VN.MT20ESW 1/20
* Other models available on request are not listed in this table
Accessories
CABLE VN.ESW 5 Quick connection cable between VN.__ESW motorsand the THINKY central unit (5 metres)
CABLE VN.ESW 8 Quick connection cable between VN.__ESW motorsand the THINKY central unit (8 metres)
CABLE VN.ESW 11 Quick connection cable between VN.__ESW motorsand the THINKY central unit (11 metres)

2) TECHNICAL DATA

Figures 1 and 2 show the overall dimensions of the VN.S / VN.M models.
V N . S 2 0 U P - V N . S 2 0 E S W -
Power supply
Consumption
Torque
Maximum outbound ro-
tations
Exit rounds
Shaft Hole
L.S. reduction ratio
Working cycle
Protection degree
Operat. temperature
Door surface
Lubrication
Weight
3) INSTALLATION
Before proceeding to install the system, make sure that the door is balanced and slides well. Check that the ropes, the springs and the
parachuting system are in good conditions. For doors that have not been installed recently, check also all the other parts subject to wear
and tear. The above instructions are essential for the safety of the system and the reliability of the operator.
Emergency Power
operation voltage
Manual release 230Vac single phase
Manual release 230Vac single phase
Manual release 400Vac three phase
Manual release 230Vac single phase
Manual release 230Vac single phase
Manual release 230Vac single phase
Manual release 400Vac three phase
Chain operated 230Vac single phase
Chain operated 230Vac single phase
Chain operated 400Vac three phase
Chain operated 400Vac three phase
Chain operated 230Vac single phase
Chain operated 230Vac single phase
Chain operated 230Vac single phase
Chain operated 400Vac three phase
VN.S20 - VN.M20 - VN.M20UP
VN.M20ESW
230Vac (50-60Hz)
3,3 A
130 Nm
18
1/20
30%
35m 2 /max
14,7 kg
Adjustable
Absolute
limit
Encoder
switches
YES --
YES --
YES --
YES --
YES --
-- YES
-- YES
YES --
YES --
YES --
YES --
YES --
YES --
-- YES
-- YES
Description
VN.S40 - VN.M40 VN.ST20 - VN.MT20
VN.S40UP - VN.M40UP VN.ST20ESW - VN.MT20ESW
38
24 r.p.m.
1" (25,4mm)
1/40
IP40
-20°C /+50°C
Oil
14,7 kg
Quick wiring Standard
THINKY wiring
-- YES
-- YES
-- YES
-- YES
-- YES
YES --
YES --
-- YES
-- YES
-- YES
-- YES
-- YES
-- YES
YES --
YES --
VN.MT40
3PH 400Vac (50-60Hz)
1,7 A
180 Nm
18
1/20
50%
40m 2 /max
14,7 kg 14,7 kg
EN
Man ned
--
--
--
YES
YES
--
--
--
--
--
--
YES
YES
--
--
38
1/40
17