Bimar VPN40 Notice D'instructions page 16

covered or incorrectly positioned.No other device
that turns the appliance on automatically must be
used, thus preventing any injury to people or
animals or damage to objects.
 If there is a fault or the appliance is not working
correctly, switch it off and have it checked by a
qualified
unqualified person can be dangerous and cause the
guarantee to become void.
 Make sure the fan is unplugged from the power
supply before removing the protective guard (1).
INSTALLATION
 After unpacking, check the integrity of the appliance; if in doubt, do not use it
and contact a qualified technician. The packaging materials (plastic bags,
polystyrene, metal staples, etc.) must not be left within reach of children, as they
constitute possible sources of danger and must be disposed of according to
applicable regulations in recycling containers. Warning: any stickers or
advertising leaflets applied on the grid, must be removed before using the
appliance.
 Before connecting the device, check that the voltage shown on the specifications
plate corresponds to that of the electrical supply, and that the plug is effectively
grounded. In the event of incompatibility between the power socket and the
appliance's plug, have the plug replaced with a suitable model by a qualified
professional, who should ensure that the cable is appropriate for the power
rating of the device. Check that other appliances with high absorption are not
connected to the power line to avoid overloading and fire hazards. The use of
adaptors or extensions is generally not advisable; if it is necessary to use them,
they must comply with safety regulations and the total current (amps) must not
be rated lower than the maximum current of the appliance.
 Before each use, ensure that the appliance is in good working order, and that the
power cable is not damaged: if you have any doubts, consult a qualified
professional.
professional. Repairs
16/60
done by an