Bimar VPN40 Notice D'instructions page 15

 Do not use the appliance if it does not work
properly or if it appears damaged; when in doubt,
contact a qualified technician.
 Make sure that the appliance works correctly: if not,
turn it off and consult a qualified professional.
 Do not move or lift the device when in use.
 If the appliance is not being used, unplug it from the
plug point.
 Always unplug the appliance from the plug point
before assembly,
emptying the tank.
 Do not allow the appliance to be exposed to the
weather (sun, rain, etc.).
 Do not touch the appliance with wet hands or feet.
 Do not pull on the power cord to move the
appliance.
 Do not pull on the power cable or the device itself
to unplug the appliance from the mains.
 If the power cord is damaged, it must be replaced
by the manufacturer or its technical assistance
centre or by someone who is similarly qualified, in
order to prevent any risks.
 This appliance is not to be used with an external
timer or with a separate distance control unit. This is
to prevent fire hazards should the appliance be
disassembly
15/60
or filling and