Care And Cleaning - VOLTCRAFT 1590245 Mode D'emploi

Connection
For information for connecting to the endoscope basic device, refer to the relevant user manual.
Enable transmitter function
• After you have connected the product, open the menu of the endoscope basic device.
• Navigate to the menu point Locator TX and press the OK button.
• Navigate to the menu point TX on and press the OK button. The transmitter function is now
activated.
• Turn back to the camera's live image. The transmitter symbol appears at the upper right of
the screen.
• To disable the transmitter function, navigate to the menu point TX off and press the OK
button.

Care and cleaning

• Use a small brush or a cotton bud to clean the camera lens.
• Rinse the product thoroughly after each use with clean water and let it dry completely before
you store it.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
a) Compatibility
• Item no. 123319: BS-1000T endoscope basic device
• Item no. 1340787: BS-1500T endoscope basic device
• Item no. 1590028: BS-M 100 endoscope finder
b) Item no. 1590245
Resolution ..................................... 640 x 480 pixels
Field of view .................................. 107°
Depth of field ................................ 5 – 60 cm
Number of LEDs ........................... 12
Illuminance ................................... 7800 lx @ 20 mm
Protection type .............................. IPX7
Operating/storage conditions ........ -20 to +70 °C, max. 95 % RH
Camera Ø ..................................... 28 mm
Cable Ø ........................................ 7 mm
Dimensions (L x Ø) ....................... 235 x 28 mm
Weight .......................................... 334 g
c) Item no. 1602401
Resolution ..................................... 640 x 480 pixels
Field of view .................................. 107°
Depth of field ................................ 5 – 60 cm
Number of LEDs ........................... 12
Illuminance ................................... 8500 lx @ 20 mm
Protection type .............................. IPX7
Operating/storage conditions ........ -20 to +60 °C, max. 95 % RH
Camera Ø ..................................... 30.8 mm
Cable Ø ........................................ 7 mm
Minimum bend radius ................... >5 cm
Dimensions (L x Ø) ....................... 245 x 30.8 mm
Weight .......................................... 424 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1590245_1602401_v1_1117_02_IPL_m_en