Safety Instructions And Hazard Warnings - VOLTCRAFT VC-56 Mode D'emploi

When measuring, hold the voltage tester by its handles
only. Do not cover the LCD display or touch the metal
contacts and the measuring points.
Please also heed the additional safety instructions in
each chapter of these instructions.
Operation is not permitted under unfavourable ambient
conditions. Unfavourable ambient conditions include:
- excessive dampness or humidity
- dust and combustible gases, vapours or solvents
- electrical storms or conditions as during a storm, e.g.
strong electrostatic fields, etc.
Any use other than that described above will damage
the product and may involve other risks, such as short
circuit, fire, electric shock, etc. Do not change or modify
any part of the product! The safety instructions should
be observed without fail!
Table of Contents
Introduction ..............................................................14
Intended Use ............................................................14
Safety Instructions and Hazard Warnings ..................15
Designation of Individual Parts ..................................17
Explanation of Symbols ............................................18
Inserting/Changing the Batteries................................18
Measuring Point Lighting ..........................................19
Carrying out Measurements ......................................19
Maintenance and Disposal ........................................22
Technical Data ..........................................................23
Safety Instructions and
Hazard Warnings
This device left the factory in perfect condition in terms
of safety engineering.
To maintain this condition and ensure safe operation,
you, as the user, must comply with the safety instruc-
tions and warnings contained in these instructions. The
following symbols must be observed:
15