Safety Instructions - Paslode IMPULSE IMLi200 Manuel D'utilisation

Safety Instructions

The following safety instructions have been included in this
booklet to provide you with basic information necessary for
safe operation of the Paslode Impulse™ 18 ga. Brad Nailer.
DO NOT ATTEMPT TO OPERATE THIS TOOL UNTIL
YOU HAVE READ AND UNDERSTAND ALL SAFETY
PRECAUTIONS AND MANUAL INSTRUCTIONS.
4
DANGER
The Impulse Brad Nailer
is an internal combustion
device. It produces hot
exhaust gases that may
ignite flammable
materials. This tool must
not be used in a
combustible environment
or in the presence of
combustible materials,
such as flammable
chemicals, adhesives,
gasoline, or solvents.
WARNING
Do not attempt to
operate this tool until
you have read and
understood all safety
precautions and manual
instructions. Failure to
follow all safety
precautions and
instructions may result in
a permanent loss of
vision, serious personal
or even fatal injury,
property damage and/or
tool damage.
WARNING
Do not expose the tool to
temperatures in excess of
120° F (49° C). Fuel and/
or the battery may burst,
releasing flammable gas.
WARNING
This tool must be operated
only in a well-ventilated
environment, because the
tool exhausts carbon
monoxide similar to a gas
chainsaw or lawnmower.
Exposure to carbon
monoxide may cause
dizziness, nausea, or
unconsciousness.
WARNING
ALWAYS keep the
Impulse Brad Nailer,
fuel cell, battery and
battery charger out of
the reach of children.