Napoleon Riverside Série Manuel D'installation Et D'opération page 25

5.
Place log #4 along the front left side of the
grate and then pull it forward, ensuring the log
notches align with the grate posts.
7. Place log #7 crosswise, ensuring the top rests
on the top left notch of log #1 and the bottom
rests on the top left notch of log #5.
9. Place log #8 crosswise, ensuring the top rests
on the top right notch of log #3 and the bot-
tom rests on the top center notch of log #5.
The thin end of log #8 should face inwards.
6. Place log #10 on the top notch of log #1.
8. Place log #6 crosswise, ensuring the top rests
on the top center notch of log #2 and the
bottom rests on the top left notch of log #4.
Log #6 should touch the front face of log #1.
10. Place log #9 crosswise, ensuring the top rests
on the top right notch of log #1 and the bottom
rests on the top left notch of log #8.
fi nishing
EN
25
W415-2978 / A / 10.07.21