Getting Started; Basic Operations - SOUNDMASTER PL979 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
DELIVERY ACCESSORIES
2 speaker, remote control, counter weight, DAB/FM antenna, instruction manual , turntable
platter, dust cover, cloth mat.
POWER SOURCE
This system is designed to operate with AC 100-240V~ 50/60Hz.
Attempting to operate from any other power source may cause
damage to the system, and such damage is not covered by your
warranty.
NOTE
: If this plug will not fit into your outlet, you probably have
an outdated non-polarized AC outlet. You should have your
outlet changed by a qualified licensed electrician.
Connect the speaker cable to the speaker terminal located on
the rear side of the unit. Put the red cable into the red terminal
and the black cable in the black terminal of the speaker
position (left and right).
Set the FM / DAB antenna on the magnetic plate and connect the antenna plug into the antenna
socket at the back of the unit.
POWER ON / OFF
Press "STANDBY/MODE" button on the unit or remote control to turn the unit on.
Press and hold "STANDBY/MODE" button on the unit or press the "
remote control to turn off the unit in standby mode.
SELECTING MODES
Press the "STANDBY/MODE" button on the unit or the "MODE" button on the remote repeatedly
to switch between the modes.
ADJUSTING VOLUME
Press the "VOLUME +/-" button on the unit or on the remote control to decrease or increase the
volume.
Total 40 volume level steps are possible and the display show Vol min and Vol max.
MUTE
During playing mode, press the "MUTE" button on the remote control, the sound will not be
heard from the speakers and 'MUTE' will show on the display
Press the "MUTE" button or the "VOLUME +/-" or the "EQ" button to cancel mute function. The
sound can be heard again from the speakers.
ERP power management
If nobody presses and holds the POWER button to turn OFF the unit after stopping
playing, the unit will power off automatically after around 15 minutes. Press the
"STANDBY/ MODE" button on the unit or the " POWER ON/OFF" button on the remote to
wake the device up from standby mode.

GETTING STARTED

BASIC OPERATIONS

3
PL979 / English Instruction Manual
AC Plug
AC Outlet
POWER ON/OFF" on the

Publicité

Table des Matières
loading

Table des Matières