Bosch HAIBIKE Mode D'emploi page 41

Safety instructions
Read all the safety information and in-
structions. Failure to observe the safety in-
formation and follow instructions may result
in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future ref-
erence.
The term battery is used in these instructions to mean all
original Bosch eBike rechargeable battery packs.
Do not allow yourself to be distracted by the on-board
u
computer's display. If you do not focus exclusively on
the traffic, you risk being involved in an accident. If you
want to make entries in your on-board computer other
than switching the assistance level, stop and enter the ap-
propriate data.
Do not use the on-board computer as a handle. Lifting
u
the eBike up by the on-board computer can cause irrepar-
able damage to the on-board computer.
Read and observe the safety warnings and directions
u
contained in all the eBike system operating instruc-
tions and in the operating instructions of your eBike.
Product description and
specifications
Intended use
The Intuvia on-board computer is designed to control Bosch
eBike systems and display cycling data.
In addition to the functions shown here, changes to software
relating to troubleshooting and functional enhancements
may be introduced at any time.
Product features
The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
All illustrations of bike parts except for the drive unit, on-
board computer (including operating unit), speed sensor
and the corresponding holders are a schematic representa-
tion and may differ on your eBike.
(1) Display function button i
(2) Bike light button
(3) On-board computer
(4) Holder for on-board computer
(5) On/off button for on-board computer
(6) RESET button
(7) USB port
(8) Protective cover for the USB port
(9) Operating unit
(10) Display function button i on the operating unit
(11) Decrease assistance level/scroll down button –
(12) Increase assistance level/scroll up button +
Bosch eBike Systems
(13) Push assistance button WALK
(14) Locking mechanism for on-board computer
(15) Locking screw for on-board computer
USB charging cable (Micro A – Micro B)
A) Not depicted, available as an accessory
Display elements of on-board computer
(a) Drive unit assistance indicator
(b) Assistance level indicator
(c) Illumination indicator
(d) Text indicator
(e) Value indicator
(f) Speedometer
(g) Gear change recommendation: Higher gear
(h) Gear change recommendation: Lower gear
(i) Battery charge indicator
Technical data
On-board computer
Product code
Max. USB port charging
current
USB port charging voltage
USB charging cable
A)
Operating temperature
Storage temperature
Charging temperature
Internal lithium-ion bat-
tery
Protection rating B)
Weight, approx.
A) Not included with the product as standard
B) When the USB cover is closed
The Bosch eBike system uses FreeRTOS
(see http://www.freertos.org).
Fitting
Inserting and removing the battery
For inserting and removing the eBike battery in/from the
eBike, please read and observe the battery operating in-
structions.
Fitting and removing the on-board computer
(see figure A)
To fit the on-board computer (3), slide it forwards into the
holder (4).
English – ​ 1
A)
Intuvia
BUI251/BUI255
mA
V
1 270 016 360
°C –5 to +40
°C –10 to +50
°C 0 to +40
V
mAh
IP 54 (dust and splash
proof)
kg
1 270 020 XBI | (14.05.2018)
500
5
3.7
230
0.15
41