Technical Data; Installation - Siemens simovert masterdrives CBP/CBP2 Mode D'emploi

SBR1/2 – Sensor Board Resolver (only for MASTERDRIVES Motion Control)
8.2

Technical Data

Order numbers
Size (length x width)
Pollution degree
Mechanical strength
During stationary operation
- Deflection
- Acceleration
During transport
- Deflection
- Acceleration
Climate class
Type of cooling
Permissible ambient or coolant
temperature
- during operation
- during storage
- during transport
Permissible humidity rating
8.3

Installation

NOTE
8-4
6SE7090-0XX84-0FB0 (SBR1)
Resolver evaluation without pulse encoder simulation
6SE7090-0XX84-0FC0 (SBR2)
Resolver evaluation with pulse encoder simulation
90 mm x 83 mm
Pollution degree 2 acc. to IEC 664-1 (DIN VDE 0110/T1),
moisture condensation is not permissible in operation
Acc. to DIN IEC 68-2-6 (for correctly installed board)
0.15 mm in frequency range 10 Hz to 58 Hz
19.6 m/s² in frequency range > 58 Hz to 500 Hz
3.5 mm in frequency range 5 Hz to 9 Hz
9.8 m/s² in frequency range > 9 Hz to 500 Hz
Class 3K3 to DIN IEC 721-3-3 (in operation)
Natural-air cooling
0° C to +70° C (32° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
Relative air humidity
Table 8-1 Technical Data
If the inverters/converters are ordered with optional functions, the
optional boards are already installed in the units when they are
delivered.
It is possible to retrofit optional boards and this can be carried out by
the user.
For this purpose, there are either three or up to six slots on the basic
unit depending on the unit type of construction for mounting the optional
boards.
An exact description of installation is included with the relevant basic
unit. As the unit has to be removed and opened in order to install
optional boards, attention must be paid to the ESD measures. Please
refer to the operating instructions of the basic unit in this regard.
Install the SBRx optional board in slot C. The SBRx optional board
does not operate in other slots.
≤ 95 % during transport and storage
≤ 85 % in operation (condensation not
permissible)
6SE7087-6NX84-0FF5
Option boards SIMOVERT MASTERDRIVES
05.2006
Siemens AG