Ventilation - shark Vancore 2 Mode D'emploi

VENTILATION

A
To maximize comfort including ventila-
tion of Vancore 2, R&D has produced a new
concept combining creating air channels
in the damping elements and insertion
of broadcasters in the cap thermo com-
pressed.
The air flow is optimal cooling and allows
a real skull.
Air enters through the upper front ventilation
(Fig. A), circulates and cools the head through
the diffusers integrated in internal damping
elements.
14
B
The quality and design of textile comfort par-
ticipate in the dissemination of good air. The
position of the upper ventilation is determined
to maximize the effectiveness of its air intake.
Depending on your machine, the fairing
can reduce the effectiveness of the ventilation.
Ventilation is open when the selector
is on the back (Fig. A).
To close it, just put the selector ahead (Fig. B)