5.0 finishing
finishing
EN
WARNING
!
•
Power supply service must be completed prior to finishing to avoid reconstruction.
•
Heat vents and air openings cannot be covered in any circumstances.
5.1
brick panel installation and removal
Slide the panels into place and secure it using the 2 screws (supplied).
A.
Ensure the brick panels are positioned properly in the appliance and are not angled or sticking out
B.
from the appliance.
To remove the panels, remove the 2 screws.
C.
Side View
20
W415-2165 / G / 08.15.18
2 screw location
Front View