Napoleon Ascent Electric Serie Manuel D'installation Et D'utilisation page 16

installation
EN
3.3.6 240V hard wiring installation
WARNING
!
• Turn off the appliance completely and let cool before servicing. Only a qualified service person should service
and repair this electric appliance.
240V HARD WIRING CONNECTION
If it is necessary to hard wire this appliance, a qualified electrician must remove the cord connection, and wire the
appliance directly to the household wiring. The wire and double-pole power supply breaker must rated for 240V
minimum 15 Amps, maximum 20 Amps.
This appliance must be electrically connected and grounded in accordance with local codes, if hard wired. In the
absence of local codes, use the current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada or the current
ANSI/NFPA 70 NATIONAL ELECTRICAL CODE in the United States.
note:
There are 4 wires from the appliance junction: white (neutral), black (power L1), Red (Power L2) and green
(ground) that connect to 240V double-pole power supply (breaker panel).
EPLACE
NCTION
WIRE NUT
WHITE
NEUTRAL
BLACK
L1
GREEN
GROUND
PLACE
CTION
WIRE NUT
RED
L2
WHITE
NEUTRAL
BLACK
L1
GREEN
GROUND
FIREPLACE
JUNCTION /
WIRE NUT /
BOÎTE DE
CAPUCHON DE CONNEXION
JONCTION
16
W415-2165 / G / 08.15.18
WHITE /
BLANC
NEUTRAL
CONNECT TO
120V POWER
SUPPLY.
WHITE
BLACK
RED
GREEN
CONNECT TO
240V POWER
SUPPLY.
CONNECT TO
120V POWER
SUPPLY MIN.
/
15AMPS /
Voltage Selector Switch
WHITE (N)
BLACK (L1)
RED (L2)
GREEN (G)
White, Black, Red and
Connect to 240V
Wire Nut
WHITE
BLACK
RED
GREEN
Green wires:
power supply.
WHITE (N)
BLACK (L1)
RED (L2)
GREEN (G)