L2 Features > Vlan > Voice Vlan - D-Link EasySmart DGS-1100 Série Manuel D'utilisation

4 Configuration
Click Apply to make the configurations take effect.
Click Delete to remove the Surveillance VLAN entry.
L2 Features > VLAN > Voice VLAN
Voice VLAN is a feature that allows you to place the voice traffic from D-Link IP phones to an assigned VLAN
to enhance the IP voice service. With a higher priority and individual VLAN, the quality and the security
of voice traffic are guaranteed. The Voice VLAN function will check the source MAC address / VLAN ID on
the incoming packets. If it matches the specified MAC address / VLAN ID, the packets will pass through with
desired priority.
The fields that can be configured for Voice VLAN are described below:
Item
Voice VLAN Global Settings
Voice VLAN
VLAN ID
Priority
OUI Settings
Default OUI
User defined OUI
Below is a list of the pre-defined voice OUI's. These cannot be used as a user defined OUI.
OUI
00:E0:BB
00:03:6B
00:E0:75
00:D0:1E
00:01:E3
Figure 4.37 – L2 Features > VLAN > Voice VLAN
Description
Specify to enable or disable the Voice VLAN function.
Specify the VLAN ID to act as a Voice VLAN.
Specify the priority level. The levels of priority are High,
Medium and Low. The default priority is High.
Pre-defined Organizationally Unique Identifier (OUI) values,
including 3COM,
NEC/Phillips, Huawei3COM, and Avaya.
The user can manually create a Telephony OUI with a
description. The maximum number of user defined OUIs is 5. It
will occupy one ACL rule when selecting user defined OUI by
default, and to configure one user-defined OUI will take extra
one ACL rule. System will auto-generate an ACL profile for all
the Voice VLAN rules.
Table 4.19
Vendor
3COM
Cisco
Veritel
Pingtel
Siemens
2 2 9 9
D-Link Smart Managed Switch User Manual
Cisco, Veritel, Pingtel,
Mnemonic Name
3com
cisco
veritel
pingtel
siemens
Siemens,