D-Link EasySmart DGS-1100 Série Manuel D'utilisation page 31

4 Configuration
The Surveillance VLAN settings that can be configured are as follows:
The fields that can be configured for Surveillance VLAN are described below:
Item
Surveillance VLAN Global Settings
Surveillance VLAN
VLAN ID
Priority
User-defined MAC Settings
Component Type
Description
MAC-Address
Figure 4.36 – L2 Features > VLAN > Surveillance VLAN
Description
Specify to enable or disable the Surveillance VLAN function.
Specify the VLAN ID to act as the Surveillance VLAN.
Specify the priority level. The levels of priority are High,
Medium and Low. The default priority is High.
Surveillance VLAN will automatically detect D-Link surveillance
devices by default. There are another five surveillance
components that can be configured for surveillance VLAN.
These five components are Video Management Server (VMS),
VMS Client, Video Encoder, Network Storage, and Other IP
brand's Surveillance Devices. Usually, VMS and VMS Clients
are necessary components for an IP surveillance service.
Enter a description for the component.
Enter a MAC address of the component.
Table 4.18
28
D-Link Smart Managed Switch User Manual