System > Poe > Poe Configuration (Dgs-1100-05Pd/08P Only) - D-Link EasySmart DGS-1100 Série Manuel D'utilisation

4 Configuration
The fields that can be configured for PoE System are described below:
Item
PoE System
PoE Power Threshold.
(Only for DGS-1100-
08P)
Power shut Off
Sequence
System Power Status
Total PoE Power
Budget
Power Used
Power Left
The percentage of
system supplied
Click Apply to make the configurations take effect.
System > PoE > PoE Configuration (DGS-1100-05PD/08P only)
The DGS-1100-05PD/08P support Power over Ethernet (PoE) as defined by the IEEE specification. The PoE
port specification is listed in the table below:
Model Name
DGS-1100-05PD
DGS-1100-08P
The DGS-1100-05PD/08P work with D-Link 802.3af or 802.3at capable devices.
IEEE 802.3at defined that the PSE provides power according to the following classification:
Figure 4.17 – System > PoE > PoE System
Description
Manually configure the system power budget. The power
budget range is between 7.1 and 64 Watts.
Defines the method used to deny power to a port once the
threshold is reached. The possible fields are:

Deny next port: When the power budget is exceeded, the
next port attempting to power up is denied, regardless of
the port priority.

Deny low priority port: The port with the lower priority will
be shut down to allow the higher priority port to power up.
Displays the total PoE power budget of this switch.
Displays the current used power of the switch.
Displays the spare power of the switch.
Displays the percentage of system power supplied of the
switch.
Table 4.4
PoE Capable Ports
Port 1 ~ Port 2: Max. PoE Output 15.4 Watts
Port 1 ~ Port 8: Max. PoE Output 30 Watts
Class Usage Output power limit by PSE
18
D-Link Smart Managed Switch User Manual
Power Budget
18 Watts
64 Watts