Telestar IMPERIAL DABMAN i300 CD Mode D'emploi page 66

> Should you detect a technical or mechanical problem please contact the TELESTAR
service.
> Only use the power unit that was included! Never use a different power unit.
> Never open the casing of the device.
> If there is a malfunction, immediately unplug the device from the power supply.
To do so, promptly unplug the power unit from the power socket and the device.
> Only use replacement parts and accessories that are shipped
and approved by us.
> Do not physically alter the device and do not use any
spare parts or additional devices that were not explicitly approved or shipped by us.
> Do not use the device in areas that have a high explosion risk.
These include, for example, petrol storage areas, petrol stations, or areas in which sol-
vents are stored or processed.
E
> Do not use the device in areas with air that is polluted with particles (e.g. flour or
wood-chip dust). Performance errors may become apparent in the shape of
the device becoming hot or smoke developing from the device or the power unit.
Loud or unusual sounds may also be a sign of a malfunction.
> In such an event, immediately remove the power unit from the socket.
> Only touch the casing of the power unit. Never pull the power unit's plug from the
socket.
The device may not be used after a malfunction, until a trained person has inspected
or repaired it.
> If you introduce the device to a cold or warm
environment, moisture may develop inside the device.In such an event,
wait approximately one hour before using the device.
> Should you be gone for a longer period or in the event of a thunderstorm,
unplug the device.
Take care to prevent moisture, water or splash water from coming into contact with
the device and ensure that receptacles filled with water -
e.g. vases - are not placed on or near the power unit.
> In the event that foreign objects or liquid should enter the
device or power unit, immediately unplug the power unit. Have a qualified specialist
inspect the device before using it again.
Otherwise there is a risk of electrocution.
> Make sure that the device and power unit is not at risk of
dripping or splash water and that there are no open flames (e.g. lit candles)
near the device or the power unit.
> The power unit must never be touched or grabbed with wet or moist
hands.
Operating Manual
66